When the oil seal material and the chemical are not compatible, there will be a chemical attack, which increases at high temperatures. The only way to remedy this is to select the right material for your application. If you’ll be dealing with harsh chemicals, choose oil seals that are made with reliable materials for their compatibility.

Start the engine and check for oil leaks.

Preparation

-50 °C to + 150 °C

ACM

 Oil seals go by many names, such as shaft seals, dirt seals, grease seals, lip seals, and many other variations of these. They are essentially simple devices used in rotary shaft equipment to prevent lubricant from escaping and for excluding contaminants such as dust, dirt and water. An oil seal’s most important function, however, is that it protects every type of ball, sleeve and roller bearing in the rotating shafts. The seals also prevent the integration of two different fluids that shouldn’t mix, such as oil and water.

Many – too numerous to list, covering a vast range of designs, sizes, and materials suitable for a never-ending range of applications. Some designs conform to International Standards such as BS1399 and DIN 3760 for metric sizes and seal types, but the majority have been manufactured to suit particular applications – hence the enormous selection available. This blog is intended to assist in this selection and will consider seal type, materials, and sizes.

Our rubber seals are used in the following industries:

Some distributors can be removed without separating the gears, and so the arm does not turn.

What should you take into account when selecting an oil seal? Different types of oil seals and various types of materials are available, each designed for specific uses. It is also important to select the right size of oil seal for the best results. For this reason, selecting the right oil seal requires adequate understanding of the application in which it will be used.