In addition to its ease of installation, the m10 wedge anchor is known for its high load-bearing capacity
- 1. Zinc layer thickness: under normal circumstances, the thicker the zinc layer, the better the corrosion resistance of electrogalvanized wire. This is because the increase in the thickness of the zinc layer can improve the self-corrosion performance of the zinc layer and form a better protective layer.
- 1. The content of alloying elements.
- 2.25*2.25mm 10 meters per kilogram
- Galvanized wire hexagonal mesh material: cold galvanized wire, hot galvanized wire, to draw wire
- Galvanized hexagonal mesh use:
Flexibility because the wire is different from other stainless steel raw materials, it is low density so in the flexibility of the appropriate excellent, it can be described according to people’s fantasy into all kinds of different shapes. Some large enterprises will buy hook flower net products, its reasons are no more than two, one is to prevent people outside the enterprise to walk around at will, the second is to advance the whole image of the enterprise. Therefore, under the premise that the protection requirements are not high, galvanized hook net can play a role in its use, the appearance of flexible hook net is settled to the use of address, from a distance and look at it like a work of art quite appreciate the meaning.
Hot dip galvanizing of steel plate is also called hot dip galvanizing. Zinc ingots are melted in the tropics and some auxiliary materials are added in hot dip galvanizing. The steel grid parts are then soaked in a galvanizing tank and a galvanizing layer is attached to the steel plate. The strength of hot dip galvanizing depends on its corrosion resistance, and the adhesion and hardness of galvanized sheet are better. The amount of galvanized steel plate after galvanizing. So this is the general amount of zinc.
2. The cage must be strong
- Zinc dipping time should be adjusted according to the thickness of wire diameter. The method of adjustment is to use the lead screw above the zinc pot, the length of the distance to the ceramic sinking roller. Thick wire diameter zinc dipping time should be long, fine wire diameter zinc dipping time should be short, zinc dipping length is in the range of 2~3.5m, which is also to reduce the zinc consumption of steel wire, is an aspect of maintaining the uniformity of zinc layer.
- Using the patented technology of the invention, regularly put zinc block into the plating aid pool, so that the bivalent iron in the plating aid into trivalent iron, and play a stable PH value in a numerical range of an important measure, but also easy to filter out the trivalent iron ions in the plating aid; Ferric ion is controlled between 0.3 and 1.0g/L; When hydrogen is not released in the plating aid, the zinc block is continued. It is an effective measure to reduce zinc slag, improve the fluidity of zinc liquid and reduce the thickness of zinc layer to play the role of plating aid filter.
Post time: 27-04-22
Post time: 19-07-22Moderate rates of foam formation may be harmless. The presence of small, homogeneous particles of large denier in the tank can stabilize the foam layer, but the accumulation of excessive solid particles can cause an explosion.
Post time: 27-12-22
Post time: 29-07-22Wire mesh production of general selection of low carbon wire, after fine and accurate active welding equipment processing, the selection of galvanized process surface treatment. After the completion of the product, the net surface is smooth and regular, good integrity, strong and consolidated, even if part of the choice or pressure will not appear lax phenomenon.
1. High tensile strength and durability
- Two: the color of the spray blade is beautiful and generous, and the color can be selected according to the use environment to integrate it with the surrounding environment. Plastic colors include grass green, dark green, black, red, white and so on.
- Sixth, different composition (mainly from carbon, manganese, nickel, chromium to distinguish 201 and 304 stainless steel) steel carbon (C) silicon (Si) manganese (Mn) phosphorus (P) sulfur (S) chromium (Cr) nickel (Ni) molybdenum (Mo) copper (Cu)304 stainless steel is a kind of universal stainless steel material, Rust resistance is stronger than 200 series stainless steel materials, 600 degrees high temperature resistance. It has excellent stainless corrosion resistance and good intergranular corrosion resistance. It also has good corrosion resistance to alkali solution and most organic acids and inorganic acids.
Regular maintenance and maintenance, save a lot of time, but also save the cost of maintenance and maintenance. With good stability, good corrosion resistance, greatly prolong the service life. More kinds, can be selected according to different uses, making annealing wire device is simple, improve the utilization rate of the device.
- 3, pasture installation of barbed rope column to choose strong impact resistance zinc column, and coupled with oblique column fixed. Due to the large size of livestock, although there is a barbed rope to deter but inevitable collision phenomenon, in order to the stability of the fence recommended to use zinc steel post.
Breeding cattle and sheep with barbed rope effect is better, because the advantages of barbed rope are more. So the thorn rope used to do animal husbandry effect is good?
Post time: 21-12-22Therefore, the rust of galvanized black iron wire has a great relationship with storage. At the same time, after rust, it should also be reasonable for post-treatment to avoid affecting its use effect. Of course, when the black iron wire is galvanized, the thickness of the galvanized layer should be ensured, so that the possibility of rust can be reduced. Speaking of galvanized iron wire, perhaps many people think it is relatively rare, in fact, it is not.
The specific design and layout principles are:
As we all know, even if it is the same kind of steel wire, because of the steel making process, wire drawing process and equipment are not the same, so the quality of steel wire production is not the same. Due to the different mechanical properties of steel wire itself, flattening process and equipment, the width and elongation of steel wire in the flattening process have different effects. Therefore, in the selection of wire diameter, the following three factors should be considered:
- The chromium-plated layer has good thermal property. When the temperature is heated below 500℃, its luster and hardness are not changed obviously. When the temperature is higher than 500℃, the initial oxidation and discoloration occur, and the hardness decreases when the temperature is higher than 700℃. The friction coefficient of chrome coating is small, especially the dry friction coefficient, which is low among all metals. So the chrome coating has good wear.
- Similar to two materials in the coating part melting together, and coating thickness can reach 100 microns, so high corrosion resistance, salt spray test 96h no problem, equivalent to 10 years under the usual environment; Cold galvanizing is electroplating at room temperature. Although the thickness of the coating can also be controlled, the binding strength and thickness of the coating are relatively low, so the corrosion resistance is poor.
- If the requirements are not high, and the ventilation is good, and relatively dry place, it is recommended to use electric galvanized barbed rope, because the price of this product has a certain advantage, for ordinary users, this is a more appropriate product.
- The strength, service life and hardness of positive and negative twisting rope are good. The tensile strength of steel wire is 1200N and that of iron wire is 350N. This service life is much longer than ordinary wire barbed rope.
Post time: 22-09-22