double sided threaded rod

3. **Installing the Fastener** With the anchor in place, screw in the provided bolt or threaded rod using a wrench or socket **Installing the Fastener** With the anchor in place, screw in the provided bolt or threaded rod using a wrench or socket **Installing the Fastener** With the anchor in place, screw in the provided bolt or threaded rod using a wrench or socket **Installing the Fastener** With the anchor in place, screw in the provided bolt or threaded rod using a wrench or socketinstalling butterfly anchors. As you turn the fastener, the anchor's wings will expand, pressing against the inner walls of the hole. Continue turning until the fastener is snug but not overly tight. Over-tightening can potentially damage the anchor or reduce its holding capacity.

...

Tek screws are designed with a unique combination of materials and manufacturing processes that ensure their superior performance. They are typically made from high-grade steel, which provides the necessary strength and resilience to withstand various environmental conditions and demanding applications. The screws are then subjected to a heat treatment process that enhances their hardness and resistance to corrosion, further extending their lifespan.

...

2. Drill the hole Use a drill bit that is slightly smaller than the diameter of the anchor rod. Drill the hole to the recommended depth, which can be found in the anchor's specifications Drill the hole to the recommended depth, which can be found in the anchor's specifications Drill the hole to the recommended depth, which can be found in the anchor's specifications Drill the hole to the recommended depth, which can be found in the anchor's specificationsthreaded rod chemical anchor.

...