double ended bolt with nut in middle

When selecting chemical stud bolts for a specific application, it is essential to consider factors such as the type of chemicals the bolts will be exposed to, the operating temperatures of the equipment, and the mechanical requirements of the joint. Consulting with a qualified engineer or supplier can help ensure the right stud bolts are selected for the job, minimizing the risk of equipment failure and ensuring the safety of personnel.

...

The primary structure of a wedge-type anchor consists of a threaded rod, a nut, a washer, and the wedge itself. The threaded rod, often made from durable materials like steel or stainless steel, is inserted into a pre-drilled hole. As the nut is tightened, the wedge is forced against the inner wall of the hole, causing the anchor to expand. This expansion generates a powerful frictional force that locks the anchor in place, providing exceptional holding power.

...

When using 50 mm chipboard screws, it's essential to pre-drill holes to prevent splitting and to guide the screw for straight insertion. The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit50 mm chipboard screws. It's also advisable to use a screwdriver or drill with a clutch setting to prevent over-tightening, which could damage the board or strip the screw threads.

...