Oil seals, also referred to as shaft seals, are widely used to prevent the leakage of medium (such as oils and grease) along a rotating shaft. This leak prevention is primarily achieved by the sealing element which can be made from a wide range of materials that are chosen according to each application. They are commonly used in gearboxes, hydraulic cylinders, and related components.

One way to recognize an improperly installed seal is by checking whether or not there is uneven shearing of the rubber after use. If this is evident, adjust by aligning the installation tools properly before pressing the seal into place.

First, an elastomer, most often nitrile, is vulcanised to a metal ring. This creates a stiffening effect that includes a specialised metal tension spring directly behind the sealing lip, keeping the oil seal firmly in place against the moving part.