countersunk self drilling screws

In addition to diameter and length, other factors such as the spacing and arrangement of shear studs also contribute to their effectiveness. The distance between each stud should not exceed certain limits to ensure uniform distribution of stress The distance between each stud should not exceed certain limits to ensure uniform distribution of stress The distance between each stud should not exceed certain limits to ensure uniform distribution of stress The distance between each stud should not exceed certain limits to ensure uniform distribution of stressshear stud sizes. This spacing is typically calculated based on the Eurocode or local building codes.

...

Proper maintenance is essential to extend the life of heavy hex head bolts and prevent premature failure. Regular inspection of the bolt threads and head for signs of wear or damage is recommended. If any issues are detected, the bolt should be replaced immediately to prevent potential safety hazards. Additionally, users should adhere to all relevant safety guidelines and regulations when handling and installing these fasteners to minimize the risk of injury or property damage.

...
  • As early as sixty years ago, zinc sulphide was first thought of as a pigment for coloring India rubber and a patent for the process of its manufacture was issued in England. But it was not until twenty years later that zinc sulphide and its manufacture was seriously considered as a pigment for paint, and in 1874 a patent was issued for a process of manufacturing a white pigment, composed of zinc sulphide and barium sulphate, known as Charlton white, also as Orr's white enamel. This was followed in 1876 by a patent issued to a manufacturer named Griffith and the product, which was similar in character to Charlton white, was known as Griffith's patent zinc white. In 1879 another patent for a more novel process was obtained by Griffith & Cawley, the product made under this process proving the best of the series placed upon the market up to that date. After that time many new processes were patented, all, however, tending to the same object, that of producing a white pigment, composed of zinc sulphide and barium carbonate, the results, however, in many cases ending with failure.