self drilling lag bolts

There are primarily two types of resin anchors polyester and epoxy. Polyester resin anchors are typically used for medium loads and general applications, while epoxy resin anchors are designed for heavy-duty applications requiring enhanced strength and bond performance. The choice between these two types depends on various factors, including load requirements, environmental conditions, and the type of concrete. Additionally, some resin anchors are designed to be used with certain types of rebar or meshwork, providing further versatility for construction professionals.


...

When using 50 mm chipboard screws, it's essential to pre-drill holes to prevent splitting and to guide the screw for straight insertion. The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit50 mm chipboard screws. It's also advisable to use a screwdriver or drill with a clutch setting to prevent over-tightening, which could damage the board or strip the screw threads.

...