Tek screws, a brand name associated with self-drilling screws, are designed for quick and efficient assembly without the need for pre-drilling, which significantly reduces labor costs and time on job sites. The 13mm wafer head variant is characterized by its unique flat, wide head that provides a larger bearing surface. This design not only helps in distributing the load evenly across the material but also minimizes the risk of surface damage, making it ideal for use in visible applications.

 In summary, the introduction of DIN6914/A325/A490 heavy-duty hexagonal structural bolts provides the construction industry with a new level of quality and performance. Its robust design, high-strength properties and compliance with industry standards make it the perfect fastening solution for structural steel applications. Whether you are a contractor, engineer or construction professional, this bolt is sure to meet and exceed your expectations for a heavy-duty hex structural bolt.

1. Dimensions The M20 foundation bolt has a diameter of 20 mm and typically comes in various lengths, depending on the required application. The length can range from 50 mm to over 200 mm, and it’s essential to choose a length that suits the thickness of the material being anchored.

1. Improper Installation One of the primary reasons anchor bolts become loose is improper installation. If the bolts are not correctly torqued during installation, they may not achieve the necessary tension to hold firm under load. Inadequate embedment depth can also contribute, as the anchor may not be sufficiently anchored in the concrete or masonry.

One of the primary benefits of 10 x 1 tek screws is their ease of use. Unlike traditional screws that require pre-drilled holes, these screws can be used directly on materials, saving time and labor costs. This efficiency makes them ideal for fast-paced construction environments where time is critical. Additionally, their self-tapping nature ensures a tight fit and reduces the risk of stripping the material, which can often occur with standard screws.

Despite their many benefits, T-head screws do have some potential drawbacks. One concern is their installation requirements; while they are relatively easy to install, they may necessitate a specific type of tool or driver, which may not always be readily available. Additionally, because T-head screws provide a wider surface area, they can be less aesthetically pleasing in applications where appearance matters, though this is often a minor consideration compared to functionality.

Standard Shear Stud Sizes