2. Drill a Hole Using a hammer drill or masonry drill bit, create a hole in the concrete or masonry surface. The diameter of the hole should match the specifications of the anchor.
Wafer head screws are distinguished by their low-profile, flat heads, which provide a sleek finish and minimize protrusion above the surface. The designation 1% 201% 4% refers to specific mechanical and material properties that make these screws particularly effective in certain applications. The combination of these percentages generally relates to the composition of the screw materials and their tensile strength.
What Are Expandable Anchors?
The Function of Shear Studs
Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameterbutterfly wall plugs for plasterboard. Next, insert the plug into the hole, gently tapping it in with a hammer until it is fully seated. Finally, screw in the accompanying screw, which will cause the wings to spread and lock the plug securely in place.
