screw chipboard

When using 50 mm chipboard screws, it's essential to pre-drill holes to prevent splitting and to guide the screw for straight insertion. The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit50 mm chipboard screws. It's also advisable to use a screwdriver or drill with a clutch setting to prevent over-tightening, which could damage the board or strip the screw threads.

...

Metal expansion nuts, often referred to as expansion anchors or expansion inserts, are specialized fasteners that expand when a bolt or screw is threaded into them. They typically consist of a cylindrical body with slits along its length or an expandable design that facilitates outward expansion. The main purpose of these nuts is to create a secure grip within a substrate, such as concrete, wood, or metal, thereby preventing loosening due to vibrational forces, temperature fluctuations, or stress.


...