Cross bracing is designed to counteract lateral forces—such as wind loads and seismic activity—that can compromise a building’s stability. By installing steel studs diagonally across a frame, the structure can effectively distribute stress and enhance resistance to buckling. The mechanism works on the principle of triangulation, where the cross-braced elements work together to form a rigid framework that maintains its shape under stress.
2. Nails Though less common than screws, nails can also be used with chipboard. They provide quick assembly and are often used in projects where speed is essential. However, they may not offer the same holding power as screws, especially in load-bearing applications.
Advantages of Hex Self-Tapping Screws
Another key benefit of 5% self-drilling screws is their ease of use. The self-drilling feature eliminates the need for separate drilling equipment, saving time and effort during the installation process. With a compatible screwdriver or drill, users can quickly and easily drive 5% self-drilling screws into place, making them a popular choice for both professionals and DIY enthusiasts.
Titanium dioxide R-996 is mainly used in powder coatings, water-based and solvent-based external coatings, high-grade color masterbatches, plastics, rubber, inks, high-grade paper and wax paper and leather upholstery fabrics, cosmetics, suitable for high-grade interior coatings, high-solid paints, Road marking paints, marine paints and inks, and also used in the plastics, rubber, paper and leather industries.
The conjugation of vitamin C to the P25TiO2NPs was confirmed by UV-visible spectroscopy of lyophilized vitaminC@P25TiO2NPs suspensions. The typical absorbance peak of ascorbic acid at 265 nm was found. However, no further characterization was done because they did not show the expected protective effect against the photo-induced cell damage (Fig. 3).
Drivers
A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.
Jinan Yuxing Chemical Co., Ltd. Affiliated to China National Chemical New Materials Co., Ltd., it is a tertiary company under China National Chemical Corporation, the largest comprehensive chemical manufacturer in China. It is also one of the most modern manufacturers of sulfuric acid titanium dioxide manufacturers in the Asia-Pacific region. This TiO2 factory has more than 50 years of experience in the development and manufacture of titanium dioxide, and the “Shengsheng” brand titanium dioxide is well-known at home and abroad.
Lithopone is produced by coprecipitation of barium sulfate and zinc sulfide. Most commonly coprecipitation is effected by combining equimolar amounts of zinc sulfate and barium sulfide:
The principal natural source of titanium dioxide is mined ilmenite ore, which contains 45-60 percent TiO2. From this, or an enriched derivative (known as titanium slag), pure TiO2 can be produced using the sulphate or chloride process.
The supply in North America remained adequate, as companies were seen constantly altering their production rates in response to the volatility in the demand pattern. In the final week of September, news of Chemours' forthcoming titanium dioxide factory in Georgia valued USD 86 million alleviated fears about supply strain.