chemical anchor bolt m12

The fully threaded rod 1/4, as the name suggests, is a long, slim rod with threads running along its entire length. The diameter of the rod measures a quarter of an inch, hence the 1/4 designation. These threads are typically standardized, ensuring compatibility with a wide range of nuts and accessories. Made from durable materials such as stainless steel or brass, these rods are built to withstand significant force without yielding or breaking.

...

The installation process of chemical anchors involves drilling a suitable hole into the substrate, followed by the insertion of the anchor. The resin and hardener are then mixed, usually in a pre-determined ratio, and poured into the anchor sleeve or directly into the hole. As the mixture cures, it expands and fills any voids, creating a tight grip on the surrounding material. This chemical bonding not only ensures superior load-bearing capabilities but also provides resistance to vibration, corrosion, and temperature fluctuations.

...