adhesive bonded fasteners

When using 50 mm chipboard screws, it's essential to pre-drill holes to prevent splitting and to guide the screw for straight insertion. The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit50 mm chipboard screws. It's also advisable to use a screwdriver or drill with a clutch setting to prevent over-tightening, which could damage the board or strip the screw threads.

...

One of the key advantages of using 40mm Tek screws is their ease of use. With their self-drilling ability, you can simply place the screw on the surface you want to fasten and start driving it in with a power drill. This saves time and effort, especially when working on large projects that require numerous fasteners. Additionally, the sharp point of the screw enables it to penetrate through tough materials without the risk of splitting or cracking
40mm
40mm tek screws.

...