m4 hex head bolt

The terms 3% and 4% often relate to the percentage of the anchor bolt’s yield strength in relation to the concrete’s compressive strength. For example, a 3% concrete anchor bolt means that the bolt can withstand loads up to 3% of the concrete's yield strength, while a 4% bolt can handle loads up to 4%. This distinction is vital for engineers and contractors, as it influences load calculations, safety factors, and the overall design of the structure.


...

Moreover, 16mm chipboard screws often feature a countersunk head, designed to sit flush with the surface of the board, providing a clean and professional finish. The head is usually Philips or Pozidriv, allowing for better torque control during installation and reducing the risk of cam-out, which is the premature disengagement of the screwdriver from the screw head The head is usually Philips or Pozidriv, allowing for better torque control during installation and reducing the risk of cam-out, which is the premature disengagement of the screwdriver from the screw head The head is usually Philips or Pozidriv, allowing for better torque control during installation and reducing the risk of cam-out, which is the premature disengagement of the screwdriver from the screw head The head is usually Philips or Pozidriv, allowing for better torque control during installation and reducing the risk of cam-out, which is the premature disengagement of the screwdriver from the screw head16mm chipboard screws.

...