With the rise of nanotechnology, research in recent years has also shown the dangers of titanium dioxide (TiO2) nanoparticles, and their genotoxicity, which refers to a chemical agent’s ability to harm or damage DNA in cells, thus potentially causing cancer. 

R-996 titanium dioxide, white powder, insoluble in water, non-physiological toxicity, chemically stable, with excellent weather resistance and anti-powdering ability.

One of the key advantages of using titanium dioxide in rubber is its ability to enhance the whiteness and brightness of rubber products. This is especially important in applications where aesthetic appeal is a priority, such as in the manufacturing of white or light-colored rubber goods. The high opacity of titanium dioxide allows for better hiding power, ensuring a uniform and attractive finish on rubber surfaces.

But that depends on how titanium dioxide is being used and how you might come into contact with it. The International Agency for Research on Cancer (IARC) has classified titanium dioxide as possibly carcinogenic to humans based on studies that showed more lung tumors in rats associated with breathing in titanium dioxide.

Scattering Power of TiO2 and Pigment Volume Concentration

Like all our products and ingredients, the titanium dioxide we use meets the highest standards for quality and safety, respecting all applicable laws and regulations as well as meeting our own safety assessments. Our scientists continue to review the latest scientific data and is confident that the titanium dioxide used in our products is safe.

It’s true that titanium dioxide does not rank as high for UVA protection as zinc oxide, it ends up being a small difference (think about it like being 10 years old versus 10 years and 3 months old). This is not easily understood in terms of other factors affecting how sunscreen actives perform (such as the base formula), so many, including some dermatologists, assume that zinc oxide is superior to titanium dioxide for UVA protection. When carefully formulated, titanium dioxide provides excellent UVA protection. Its UVA protection peak is lower than that of zinc oxide, but both continue to provide protection throughout the UVA range for the same amount of time.

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

This precipitate is not suitable for a pigment until it is filtered, dried, crushed, heated to a high temperature and quenched in cold water. The second heating in a muffle furnace at 725 °C produces crystals of the right optical size.

Jinan Yuxing Rutile Titanium Dioxide R-818 is a rutile titanium dioxide pigment coated with inorganic silicon aluminum and organic surface treatment. It has good gloss and hiding power, high weather resistance and good dispersibility.
Scope of application: plastic steel profiles, coil paint, powder coatings, rubber, masterbatch, etc.

EFSA’s scientific advice will be used by risk managers (the European Commission, Member States) to inform any decisions they take on possible regulatory actions.