allen head wood screws

A CSK head self-drilling screw features a unique head design that tapers down to meet the surface of the material being fastened. This countersunk design allows the screw to sit flush with or below the surface, providing a clean finish. The self-drilling capability stems from a drill-like point, which allows the screw to create its hole as it is driven into the material. These screws are typically made from high-strength steel or stainless steel, making them suitable for various applications.


...

When using 50 mm chipboard screws, it's essential to pre-drill holes to prevent splitting and to guide the screw for straight insertion. The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit50 mm chipboard screws. It's also advisable to use a screwdriver or drill with a clutch setting to prevent over-tightening, which could damage the board or strip the screw threads.

...