1 2 stainless steel anchor bolts

Indented foundation bolts, also known as anchor bolts, are designed with a unique feature - an indentation or groove on their surface. This indentation serves a dual purpose. Firstly, it increases the surface area in contact with the concrete, thereby enhancing the bond strength between the bolt and the foundation. Secondly, during the tightening process, the indentation acts as a stress concentrator, causing the concrete around it to fracture, creating a mechanical interlock. This mechanism significantly improves the load-bearing capacity and resistance to shear forces.

...

When using 50 mm chipboard screws, it's essential to pre-drill holes to prevent splitting and to guide the screw for straight insertion. The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit The pre-drilled hole should be slightly smaller than the screw's shank to allow for a tight fit50 mm chipboard screws. It's also advisable to use a screwdriver or drill with a clutch setting to prevent over-tightening, which could damage the board or strip the screw threads.

...