4.  SHAFT SPEED: As different shafts move at different speeds you need to consider the runout, the housing bore, and oil type being sealed. Ensure you select a seal that will not suffer from abrasions or spiralling.

Innovations in Oil Seal Manufacturing: Advancing Performance and Reliability

Oil seals are always exposed to a lot of chemicals, both mild and harsh chemicals. The seals react by showing some signs like cracks, blisters, and discoloration especially when the chemical is harsh. This clearly shows that the chemical is not compatible with the seal, which goes as far as affecting its cross-link density (increase or decrease). When the cross-link density increases, the seal material becomes harder, but when it decreases, the seal material becomes softer.

Preparation

Table 1: The order of priority for selecting oil seals

How to Choose the Right Oil Seal

Nitrile 
High wear resistance good running properties for general use

With minor lip

Type code
Table 3: Features of each seal type

Among the most common causes of oil seal failure are:

The material of the sealing lip is chosen according to the liquid to be sealed and the rotational speed. For larger shafts, an NBR sealing lip can cope with surface speeds of up to 10-12 m/s, while an FKM lip is suitable for speeds of up to 35-38 m/s.