shear studs

The design of these screws features a coarse thread that enables quick and efficient penetration into the chipboard. The sharp point at the tip ensures easy starting, minimizing the chances of splitting. Additionally, the bugle head, with its flat top and slightly larger diameter, allows for flush mounting and a clean finish. The screws are usually made from steel, often with a zinc coating for enhanced corrosion resistance, ensuring a long lifespan even in humid environments.

...
shear studs2025-08-15 01:41
1188

Resin anchor studs are specialized fasteners designed to be installed into concrete and masonry substrates using a resin adhesive, typically an epoxy based solution. The studs are embedded into pre-drilled holes filled with the resin, which then cures to form a strong bond between the stud and the substrate. This anchoring method is particularly useful in environments where traditional mechanical anchors may falter due to high loads, dynamic forces, or the inherent variability of the base material.


...
shear studs2025-08-15 01:14
394

One of the defining characteristics of black hex head bolts is their adaptability across a multitude of industries. They are widely used in construction, automotive, and machinery applications. For instance, in the automotive industry, these bolts secure engine components, ensuring that vehicles can withstand the rigorous demands of both performance and safety. In construction, they are employed to fasten structural elements, offering the strength needed to support buildings and infrastructures.


black hex head bolt

black

...
shear studs2025-08-15 01:14
1990

  • Anatase titanium dioxide nanoparticles (ATDNs) have emerged as a fascinating material due to their unique properties and vast potential applications. These nanoparticles are derived from the anatase form of titanium dioxide, which is known for its high photocatalytic activity, stability, and biocompatibility. As a result, ATDNs are finding widespread use in various fields, including cosmetics, healthcare, energy, and environmental remediation.

  • To ensure the optimal precipitation percentage, it is important to carefully control these factors during the precipitation process. For example, a higher concentration of titanium sulfate will typically result in a higher precipitation percentage, but may also lead to the formation of impurities. On the other hand, a lower pH of the reaction mixture can promote the precipitation of titanium hydroxide, but may also result in a lower precipitation percentage.


  • China is one of the largest producers of titanium oxide in the world, and the industry plays a significant role in the country's economy. Titanium oxide, also known as titanium dioxide, is a naturally occurring oxide of titanium with the chemical formula TiO2. It is commonly used as a pigment in a wide range of products, including paints, coatings, plastics, and cosmetics.
  •  

  • It has an extremely high melting point of 1 843ºC and boiling point of 2 972ºC, so occurs naturally as a solid, and, even in its particle form, it is insoluble in water. TiO2 is also an insulator.

  • Some food products will include titanium dioxide on their nutrition label. But again, it can be hard to tell for those who don't list the ingredient. 

  • ≤0.3

  • Zinc oxide. Zinc oxide is a popular cross-linking agent for rubber and for various resins. It is essential in the formulation of solvent-borne polychloroprene adhesives. Furthermore, zinc oxide is a good UV stabilizer, has biocidal activity and has a relatively high refractive index (2.0) which makes it an efficient white pigment. Some typical properties are: density 5.6 g/cm3; particle size 0.036-3 μm; oil absorption 10–20 g/100 g; specific surface area 10–45 m2/g. Zinc oxide is produced by reaction of the metal in the vapour state with oxygen. Zinc oxide is nonporous and is quite pure. Thus, the high surface area of some grades is due to the small particle size of zinc oxide. Some grades, especially for use in the rubber industry, are surface modified by deposition of 0.2-0.4% of stearic acid, propionic acid, or light oil [47].

  • However, most dermatologists will warn their patients not to rely on mineral makeup alone in order to be protected by the sun’s rays. This is because there can be quite a bit of variation with mineral foundation – not only with how much we apply but how much titanium dioxide the foundation contains.

  • The Manufacturing Excellence of TIO2 Powder Rutile Titanium Dioxide

  • Titanium dioxide, or TiO2, will be listed on product labels, but companies are not required to list ingredient size or structure. When it is used in sunscreens to block UV light, titanium dioxide is considered an active ingredient, which means the concentration must also be listed.

  • What other candies and food contain titanium dioxide?