10x3 4 tek screw

Installation involves several steps. First, holes are drilled into the foundation to the exact depth and diameter required for each bolt. The bolts are then inserted, often with a nut and washer attached at the end to maintain position. A chemical grout or concrete is then poured around the bolt to fill the void, creating a strong mechanical connection. Once the concrete has cured, the nuts are tightened, securing the structure to the foundation Once the concrete has cured, the nuts are tightened, securing the structure to the foundation Once the concrete has cured, the nuts are tightened, securing the structure to the foundation Once the concrete has cured, the nuts are tightened, securing the structure to the foundationfoundation bolt fixing.

...

Tek screws, named after their inventor Tek Screw Corporation, are designed with a unique thread pattern that allows them to tap their own hole in metal, wood, or composite materials. Their primary advantage lies in their ability to provide a secure hold without pre-drilling, saving time and effort on job sites. The 20-inch variant is particularly valuable due to its length, which enables it to penetrate deeper and handle heavier loads compared to shorter screws.

...