Lithopone

This route affords a product that is 29.4 wt % ZnS and 70.6 wt % BaSO₄. Variations exist, for example, more ZnS-rich materials are produced when zinc chloride is added to the mixture of zinc sulfate and barium sulfide.^[1]

Lithopone is manufactured by a process (Fig. 1) in which barium sulfide solution is prepared by reducing barite ore (BaSO ₄) with carbon and leaching the resulting mass.

Appearance:

The reaction liquid is filtered through plate and frame pressure to obtain lithopone in the form of a filter cake with a moisture content of no more than 45%. It is then roasted in a drying furnace to change the crystal form of lithopone, and is then pickled with sulfuric acid at a temperature of 80°C. Finally, it is washed with water, reinforced with colorants, filtered, dried and ground into powder.

Titanium dioxide is produced in two main forms. The primary form, comprising over 98 percent of total production, is pigment grade titanium dioxide. The pigmentary form makes use of titanium dioxide’s excellent light-scattering properties in applications that require white opacity and brightness. The other form in which titanium dioxide is produced is as an ultrafine (nanomaterial) product. This form is selected when different properties, such as transparency and maximum ultraviolet light absorption, are required, such as in cosmetic sunscreens.

In recent years, there has been a growing focus on sustainability and environmental responsibility in the manufacturing industry. Titanium dioxide manufacturers are no exception, with many companies implementing eco-friendly practices to minimize their impact on the environment. This includes reducing energy consumption, implementing recycling programs, and exploring alternative production methods that are more environmentally friendly.

Thermogravimetric analysis (TGA) was conducted in a sample of vitaminB2@P25TiO₂NPs using a TA-THA Q5000 equipment. Temperature ramp rate: 10 °C/min, maximum temperature: 1000 °C, under air. Part of the same sample was mounted on conductive copper tape grids and observed through a Carl Zeiss Sigma scanning electron microscope (SEM) with an EDS probe, at the “Laboratorio de Microscopía y Análisis por Rayos X” (LAMARX) of National University of Córdoba (Argentina).

At present, the equipment and manufacturing process of domestic manufacturers of polyvinyl butyral are constantly getting closer to those abroad. For example, the wonderful use of polyvinyl butyral (PVB) has occurred in the printing industry and ceramic industry. Therefore, the domestic application of polyvinyl butyral (PVB) has an obvious upward trend in recent years.

For example, in the glass industry, it is because polyvinyl butyral (PVB) has good low-temperature impact strength, windability, light transmittance, light resistance, weather resistance, sound insulation, UV insulation and other properties, so that once the laminated glass is sealed together, the glass sandwich (i.e. laminated material) will appear as a whole and look like ordinary glass. For example, in the porcelain industry, polyvinyl butyral is made into a film and used for printing paper film of ceramic (or enamel) products. First, it reduces the original glue small paper Decal process, reduces the production cycle and production cost, and second, it makes its ceramic (or enamel) patterns bright in color and smooth in texture.

With the rapid development of science and technology in recent years, more and more industries have found the characteristics of polyvinyl butyral (PVB): high strength, high toughness, fatigue resistance, corrosion resistance and so on. Compared with traditional materials, polyvinyl butyral (PVB) is more and more widely used because of its larger development space and wider application fields!

Application field of polyvinyl butyral -- safety glass

The membrane made of polyvinyl butyral (PVB) is a special product used to manufacture safety glass and bulletproof glass. Safety glass is a special glass made of a layer of PVB diaphragm sandwiched between two layers of ordinary glass. It has good low-temperature impact strength, windability, light transmittance, light resistance, weather resistance, sound insulation, ultraviolet insulation and other properties. When subjected to strong external impact, PVB diaphragm can absorb impact energy, so that the glass will not break or prevent debris from hurting people. Moreover, the safety glass added with PVB diaphragm has the characteristics of high transparency, water resistance and aging resistance, and can be used in the environment of - 60 ℃. In addition, it can also be used as transparent material to replace plexiglass.

Application field of polyvinyl butyral -- ceramic film flower paper

EFSA’s scientific advice will be used by risk managers (the European Commission, Member States) to inform any decisions they take on possible regulatory actions.