75mm self drilling screws

One of the primary advantages of double end threaded rods is their ability to facilitate the connection of two non-threaded components. This feature makes them particularly useful in situations where a secure, yet adjustable joint is required. For example, in construction, double end threaded rods can be used to join metal beams, allowing for flexible arrangements of structural elements without the need for additional fixtures. Their design allows for easy adjustments, making it simple to achieve the desired tension or alignment.


...

One of the main advantages of using self-drilling drywall screws for metal studs is the time-saving factor. With traditional screws, you would first need to drill a pilot hole in the metal stud before driving in the screw. This extra step can be time-consuming, especially when working on a large project with many screws to install. However, with self-drilling screws, you can simply drive them directly into the metal stud without any pre-drilling required, saving you valuable time and effort.

...

Rivets are permanent fasteners that join materials by means of a mechanical interlock. They consist of a cylindrical shaft with a head at one end and are installed by deforming the unheaded end after insertion. Rivets are commonly used in structural applications such as bridges and aircraft, where a high level of strength is critical. There are different types of rivets, including solid rivets, blind rivets, and tubular rivets. Blind rivets, also known as pop rivets, can be installed from one side of the workpiece, making them ideal for applications where access to both sides is limited.


...

Tek screws, a brand name associated with self-drilling screws, are designed for quick and efficient assembly without the need for pre-drilling, which significantly reduces labor costs and time on job sites. The 13mm wafer head variant is characterized by its unique flat, wide head that provides a larger bearing surface. This design not only helps in distributing the load evenly across the material but also minimizes the risk of surface damage, making it ideal for use in visible applications.


...