double sided threaded stud

Chipboard, also known as particleboard, is a widely used material due to its affordability and versatility. However, its density and composition require specialized fasteners to ensure secure fixing. The 50 mm size refers to the length of the screw, which is 50 millimeters from the head to the tip. This length is typically ideal for thicker chipboard pieces, allowing for adequate penetration into the material without compromising structural integrity.

...

1. Remove the Failed Anchor If you suspect that a resin anchor has failed, carefully remove it from the surface using a drill and bit designed for the specific anchor type. Be sure to avoid damaging the surrounding area during the removal process Be sure to avoid damaging the surrounding area during the removal process Be sure to avoid damaging the surrounding area during the removal process Be sure to avoid damaging the surrounding area during the removal processfixing resin anchors.

...

Thirdly,the thickness of the material is also an important factor to consider when selecting the correct wedge, bolt, and drill sizewedge bolt drill size. The thickness of the material will determine the length of the fasteners required. Thicker materials may require longer fasteners to provide adequate holding power, while thinner materials may only require shorter fasteners. It's important to ensure that the fasteners you select are long enough to penetrate the entire thickness of the material and provide adequate holding power.

...

Hex head screws are characterized by their six-sided heads, which allow for a secure grip with a wrench or socket. This makes them easier to tighten compared to other screw types, offering greater torque and reducing the risk of stripping. Made from materials such as stainless steel, carbon steel, and alloy steel, hex head screws are known for their strength and resistance to corrosion. Depending on the specific use case, screws can be designed with different coatings for added protection against rust and environmental factors.


...