Oil seals are often called grease, fluid, or dirt seals. These seals close spaces between stationary and moving components in mechanical equipment. Oil seals are designed to prevent the escape of lubricant. They also block contaminants from entering machinery. This is especially important in severe environments where heat and foreign objects may be frequently present. They also prevent the mixing of different mediums like lubricating oil and water.

Next, apply a small amount of grease to the seal lip(s) and the area of the shaft in contact with the seal.  When using a double-lip seal, fill the small cavity between the two lips with grease as well. This both protects the lips during initial installation and break-in, and also acts as another barrier keeping contaminants out. When installing rubber-coated seals, apply lubricant to the outside diameter as well. This will help prevent the seal from rebounding or backing out from its mounting place.

　　　　　　　　　　　　a)

ERIKS

Heat resistance

Describe difference between mechanical seal and oil seal – Whether it is a mechanical seal or oil seal, it prevents the fluid seeping the liquid to other parts of the machine, or it keeps the rotating parts lubricated.