Scrap zinc or concentrated zinc ores are dissolved in sulfuric acid, the solution is purified, and the two solutions are reacted. A heavy mixed precipitate results that is 28 to 30% zinc sulfide and 72 to 70% barium sulfate.

Par ailleurs, dès lors que l'on recherche une certain transparence dans les travaux artistiques, son pouvoir opacifiant et son pouvoir dégradant des couleurs pas trop élevés le désignent pour remplacer le dioxyde de titane trop opaque et trop dégradant (§ Des Liants et des couleurs aux éditions EREC)

With the rise of nanotechnology, research in recent years has also shown the dangers of titanium dioxide (TiO2) nanoparticles, and their genotoxicity, which refers to a chemical agent’s ability to harm or damage DNA in cells, thus potentially causing cancer. 

As for titanium dioxide, the FDA approved titanium dioxide for use as a food additive in 1966. The last time the agency reviewed the additive’s safety, according to the Guardian, was in 1973.

Is titanium dioxide illegal in other countries?

Titanium dioxide (TiO₂) is a naturally occurring mineral that is mined from the earth, processed and refined, and added to a variety of foods, as well as other consumer products. White in color, it is used to enhance the color and sheen of certain foods and is also key for food safety applications. In its natural state it exists in different bulk crystalline forms, such as anatase and rutile, but during processing it is ground into a very fine powder.

Apart from the cosmetics industry, the coatings and plastics industry is also expected to contribute significantly to the growth of titanium dioxide in 2023. Coatings made from titanium dioxide offer excellent hiding power, durability and weather resistance, making them ideal for outdoor applications. Demand for high-quality coatings is expected to surge as the construction and automotive industries expand. Titanium dioxide is at the forefront of providing aesthetic and protective coatings, making it an indispensable ingredient in the industry.

A significant body of research, mostly from rodent models and in vitro studies, has linked titanium dioxide with health risks related to the gut, including intestinal inflammation, alterations to the gut microbiota, and more. It is classified by the International Agency for Research on Cancer (IARC) in Group 2B, as possibly carcinogenic to humans.

Conclusion

Titanium dioxide has similar uses in non-food products. It is used in sunscreen as effective protection against UVA/UVB rays from the sun, which creates a physical barrier between the sun’s rays and the skin. It’s also used to whiten paint, paper, plastic, ink, rubber, and cosmetics.

About CCM:

Titanium dioxide nanoparticles may accumulate and cause DNA damage

Total Zinc (as ZnS)

Micronized titanium dioxide doesn’t penetrate skin so there’s no need to be concerned about it getting into your body. Even when titanium dioxide nanoparticles are used, the molecular size of the substance used to coat the nanoparticles is large enough to prevent them from penetrating beyond the uppermost layers of skin. This means you’re getting the sun protection titanium dioxide provides with no risk of it causing harm to skin or your body. The coating process improves application, enhances sun protection, and prevents the titanium dioxide from interacting with other ingredients in the presence of sunlight, thus enhancing its stability. It not only makes this ingredient much more pleasant to use for sunscreen, but also improves efficacy and eliminates safety concerns. Common examples of ingredients used to coat titanium dioxide are alumina, dimethicone, silica, and trimethoxy capryl silane.

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

Magnesium occurs in seawater and in ores such as dolomite (CaCO ₃ MgCO ₃), magnesite (MgCO ₃), and carnallite (MgCl ₂ KCl 6H ₂O).

Risk managers at the European Commission and in EU Member States have been informed of EFSA’s conclusions and will consider appropriate action to take to ensure consumers’ protection.

4. Should I stop eating products that contain TiO₂?