self drilling screw countersunk head

The 1 2 indicates the dimensions of the anchor plate. It could mean a 1 by 2-inch rectangular plate or a 1.2-inch thick plate, depending on the context2-inch thick plate, depending on the context2-inch thick plate, depending on the context2-inch thick plate, depending on the context5 8 x 4 1 2 strong bolt 2 anchor. Regardless, the plate's purpose is to distribute the load from the bolts evenly onto the substrate, preventing localized stress and potential damage.

...

The installation process of butterfly wall plugs is straightforward and requires minimal tools. First, choose the appropriate size plug based on the weight of the item to be hung and the thickness of the plasterboard. Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameterbutterfly wall plugs for plasterboard. Next, insert the plug into the hole, gently tapping it in with a hammer until it is fully seated. Finally, screw in the accompanying screw, which will cause the wings to spread and lock the plug securely in place.

...

The 5% self-drilling screws are designed for use on thin metal sheets, typically ranging from 0.035 to 0.157 inches in thickness. These screws have a low drilling capacity and are ideal for applications where a clean and precise hole is required. The 5% self-drilling screws are commonly used in the HVAC industry, metal fabrication, and roofing projects. Their sharp point and fine threads allow for quick and easy installation, making them a preferred choice for professionals and DIY enthusiasts.

...

With their ease of use, 2-inch self-drilling screws can also contribute to reduced labor costs. By speeding up the installation process, fewer labor hours are required to complete a project. This efficiency can lead to significant savings, particularly in large-scale construction endeavors. Furthermore, with fewer tools needed—thanks to the elimination of pre-drilling—there is less reliance on multiple laborers to manage different aspects of the fastening process.


...