square drive chipboard screws

The installation process of butterfly wall plugs is straightforward and requires minimal tools. First, choose the appropriate size plug based on the weight of the item to be hung and the thickness of the plasterboard. Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameter Then, drill a pilot hole slightly smaller than the plug's diameterbutterfly wall plugs for plasterboard. Next, insert the plug into the hole, gently tapping it in with a hammer until it is fully seated. Finally, screw in the accompanying screw, which will cause the wings to spread and lock the plug securely in place.

...

The design of an M8 wedge anchor is simple yet effective. It consists of a threaded rod with a nut and washer, accompanied by a wedge-shaped expansion sleeve. When installed, the anchor is drilled into a pre-drilled hole in the concrete, and then the bolt is inserted and tightened. As the bolt is tightened, it pulls the wedge-shaped sleeve against the sides of the hole, creating friction and causing the sleeve to expand. This expansion locks the anchor securely in place, providing a strong hold that can withstand significant loads.

...